Staff Answer
Jul 22, 2026 - 07:48 AM
There are no published specification for the tongue length on the DK2 MMT-ATV (3.85' × 5.35' Poly ATV Trailer). DK2 only publishes the following dimensions:
- Overall assembled length: 64.2"
- Bucket length: 48"
- Overall width: 46.3"
- Hitch height: 11.8"
Using those published dimensions, we can estimate:
- Overall length: 64.2"
- Bucket/body length: 48"
That leaves approximately 16.2" from the front of the bucket to the center of the coupler (allowing for the front frame and A-frame tongue). Since the body sits slightly behind the front crossmember, the actual steel tongue itself is likely in the 18-22 inch range from the front crossmember to the coupler, but that's an estimate—not a factory specification.
If the above provided measurements are not specific enough and could result in some challenges for you, please let us know so we may investigate this one further.
Add New Comment